HY-FOIL WING BACK WING

Stabilizer Back Wing for Wing Foil

From €139.00 Regular Price €159.00

Incl. 19% VAT, excl. Shipping Cost

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Add to Cart

Back wings or stabilizers are an important component for foils as they provide stability and control. They are designed to increase lift on the back underside of the foil while reducing drag. This stabilizes the foil and reduces the tendency to roll over.

Without stabilizers, the foil would become unstable at high speeds or during sudden movements and it would be more difficult to maintain control.

There are different types of stabilizers to suit different foils and conditions. Our selection is optimized for use with our HY-Wing foils. Our Foils are pre-configured and we recommend using the larger Back Wing for both the large Front Wing 2000 and 1600 and vice versa.

Of course, you can upgrade your foil set with another, additional back wing.
The Carbon Backwings are delivered with a protective cover.

TECH SPECS
Size 220: surface 220 cm², span 396 mm, weight 0,16 kg
Size 282: surface 282 cm², span 492 mm, weight 0,19 kg

TEST REPORTS

WING SURFERS MAGAZIN 02-2022 / HY-FOIL WING 1600

As a newcomer to the foil business, Gunsails still keeps its range clear. The aluminum foil is currently available with a 1600 square centimeter frontwing, but you can choose between two backwings with 220 or 282 square centimeters of surface area.

ON THE BEACH: If you extrapolate robustness from weight, then the Gunsails-Foil should have extraordinary endurance qualities. At 5.5 kilos, it weighs an average of one kilo more than the GA in the hybrid version, for example. The workmanship also appears very solid. The strong undulations in the front and rear wings are eye-catching. Gunsails calls this a bionic design approach; dolphins and albatrosses send their regards. The first glance at the very voluminous profile makes it clear that no high-end speed foil is waiting for us here. To prevent unplanned foil-wing contact from ending in a crack in the wing canopy, all tips are slightly beveled or rounded. For the backwings, we chose the set-up with the smaller variant.

ON THE WATER: At the start, the medium sized, slightly stretched foil of 1,600 square centimeters comes out of the water quite early and harmoniously, even with the small rear wing. The fact that control was very important in the development is noticeable right from the first run. Both on the roll and pitch axis, the foil is very stable in the flight phase. As expected, you always feel a slight resistance of the foil. Nevertheless, the speed is okay and with a little more pull on the hands you can still fly the set-up even with increasing wind due to the good controllability. When jibing, you can fly the curved 1,600 very tight around the turn with medium pressure on the feet. When doing so, the tips should always remain in the water, otherwise the flow will break off abruptly. For freestyling and jumping, the set-up is very heavy and not very agile.

FOR WHOM? Developed for beginners and intermediates in wingfoiling, the 1,600 front wing for pilots up to 80 kilos also covers the lower wind range from ten, eleven knots well. If you want even more stability and lift, you should choose the larger rear wing. The rounded tips and thicker profile offer extra safety in the event of involuntary contact with the foil, especially for newcomers.